COLASIT AG
Plastic construction
P.O. Box 85
Faulenbachweg 63
CH - 3700 Spiez
 
Phone +41 (0)33 655 61 61
Fax +41 (0)33 654 81 61
Mail info@colasit.ch

Mist Eliminator

 
Fields of Application  Mist eliminator are used wherever droplets of pollutant or process materials must be removed from liquid-laden waste air. This is the case, among others, in the surface-treatment, chemical, and electronics industries.
 
  Schematic function diagram
   
   
 
  Operating principle of a lamellar separator
   
   
 
Operating Method  The waste air drawn in by a plastic ventilator is passed through a grid section with repeated changes of direction. Because of their inertia, the droplets collide with the walls of the section, are then separated and can be removed from the system below.
Separation Capacity  The separation capacity is characterised by the smallest separable droplet (droplet limit). The sections used by COLASIT are optimally designed for each requirement. The rate of separation amounts to 99.9% of all droplets which are bigger than the droplet limit diameter.
Separation of Aerosols If the waste air tends to form aerosols these can be effectively separated with a specially sized mesh.
Type of Construction The COLASIT mist eliminator consists of a rectangular housing, incorporated with standard separation packs in a two-layer configuration. The packs can be removed from the side for cleaning. All components are made of thermoplastic synthetics.